2024 UPT with a Steerable rear axle.
The following specification and pricing is for a 10.75m Tri Axle Machinery Trailer.
Model Specification: Heavy Duty Tri Axle
Deck: 7.8m Level deck + 1.2m Beavertail + .25m
Width: 2.49m
Drawbar: 1.5m Custom Fabricated 8mm Gr350 web plate with 12mm x 150mm top and
bottom strap, hand fabricated to correct height & alignment of trailer deck.
Safety Chain: Drawbar design incorporating chain lugs with 19mm Grade 80 safety chain. To
ADR 62
Hitch Height: Custom to suit required height. TBA By Client.
Floor: 5mm BlueScope checker plate floor to AS/NS 1594 with 25mm x 12mm fully
welded grip bars over beavertail and start of rear deck.
Front Board: Gr 350 10mm front board, passing deck 50mm with raised section to 100mm to
pick up front leg.
Ramps: 2700mm x 850mm hydraulic operated ramps with 250mm x 150mm x 6mm
beams. 4 holes in 5mm checker plate and 25mm x 12mm fully welded grip bars.
38mm solid ramp hinge bar with greaseable bushes. 8mm Safety chains and
ratchet dogs
Hydraulic power pack: Self-contained double acting power pack and 12 Volt battery with coaming
mounted pendant. 50 amp Anderson charge line to drawbar. Flow control valve
for ramp speed. Fuse Protected, Filled with S46 hydraulic Oil. Mounted in Deck
at front of trailer
Ram Cylinders: 2 - AG Cylinder 2.5” Bore 18” stroke with dual Ports, fitted with Burst Protection.
Hydraulic Lines: Gates twin wire Ezy Flex Hydraulic Hose rated to 4800 PSI. Full work shop
crimped hydraulic fittings.
Chassis Beams: Custom Fabricated Chassis, UPT Design. Webb plate laser cut 8mm Gr350 plate
with built in 35mm camber. Laser cut outs for 100mm x 50mm x 4mm cross
members to pass through. Bottom strap 100mm X 20mm Gr350 Flat bar.
Cross Members: 100mm X 50mm X 4mm BlueScope RHS.
Coaming Rail: GR350– 300mm x 10mm Flush coaming rail with laser cut out recesses, 3mm
folded & welded light and reflector Bracket, light and reflector countersunk for
protection. All conforming to ADR Requirements.
Tie Bars: Coaming with 120mm laser cut-out, Mid mount 25mm bars
In Deck Tie points: 12 Deck welded 10mm Bissalloy chain tie points for both 8mm & 10mm Chain.
Suspension: BPW Airbag Suspension
Axles: BPW Axle. 19.5
Brakes: Wabco EBS with “S” Cam full air with Auto slack adjuster. Spring Brakes, to meet
ADR 38/02 specifications SARN 32788
Airlines: 3/8 Air Brake Hose connected to either Bayonet type or Duomatic Coupling TBC
Tyres: 265R70 x 19.5” Low profile steel radials.
Rims: 19.5” Tubeless 8 stud steel rims.
Lights: Twin shatterproof LED brake & tail per ramp with Indicator in centre, multi volt
flush mount in ramps. Twin Number plate light to backboard.
Coaming Lights: 8 Per side marker lights, red & amber with clear lenses.
Safety Markers: Do Not Over Take Signage, rear zebra marker signs front reflectors and rear
reflectors.
Legs: Front – Hydraulic Bracket Mounted 3.8T Leg
Rear – Dropdown fabricated leg with 40mm clearance. Fitted with spring loaded
latch and removable pins.
Mudflaps: Front of axle group, mudflaps with anti-sail brackets. Rear of axle group
mudflaps. Full mudflaps across rear of trailer.
Hitch: Pintle 4 Bolt, Rated to 8.1 Tonne
Hinges to Boxes: All hinges fitted with grease nipples.
Sandblasting: Professionally Sandblasted to Class 3 Finish.
Paint - Primer: Barrier Protec EX-408 Zinc Phosphate Primer
Paint - Finish: Barrier Protec 625 Acrylic Polythane enamel Premium 2PAK. With superior
opacity is suited in chemical and marine environments.
2 Colour Base Lay Out:
*Colour Selected from the Protec Range
(all other colours POA)
Black – Full Trailer
Deck Height: 990mm
Laser Alignment
Standard Inclusions:
Independent laser alignment to all trailers before handover.
• 2- Side steps to access deck.
• Digital Odometer fitted to Axle.
• Flush Ramp Mounted Reverse lights.
• Ramp Mounted Spot Lights.
• Custom Deep Coaming.
Capacity & Tare Weight Axle Group 20T
Coupling 8.1T
Stamped Gross ATM 28.1T
Approx. Tare 7T
Additional Custom Options: Drawbar toolbox $ 1500 ex
Bucket Bar $ 1200 ex
2- 1200mm underslung Toolbox $ 2400 ex
2400mm x 990mm x 350mm in deck well $ 1800 ex
BPW 19.5 Airbag Suspension $12600 ex
BPW Rear Steer Axle $ 7800 ex
Digital Raise lower and return to ride valve $1000 ex
Wabco Smart Board with Axle Scales $ 800 ex
Black Rims $ 2400 ex
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Obtenga Financiamiento
