Large excavator
PC360
igh production earthmoving from an excavator designed to be easily transportable.
For versatility and high production consider the PC360LC-11 large excavator — it combines bucket capacity up to 2.56 yd3 and excellent power with dimensions making it transportable.
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Engine
Model Komatsu SAA6D114E-6*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharger with air-to-air aftercooler and EGR
Number of cylinders 6
Bore 4.49 in
Stroke 5.69 in
Piston displacement 540 in³
Horsepower:
SAE J1995 - Gross 271 HP
ISO 9249/SAE J1349 - Net 257 HP
Rated rpm 1,950
Governor All-speed control, electronic.
Fan drive method for radiator cooling Mechanical
*EPA Tier 4 Final emissions certified
Hydraulics
Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valves, 6 selectable working modes
Main pump:
Pumps for Boom, arm, bucket, swing, and travel circuits
Type Variable displacement piston type
Maximum flow 141 US gpm
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi
Travel circuit 5,400 psi
Swing circuit 4,050 psi
Pilot circuit 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter
Boom / 2 5.5 x 58.3 x 3.9 in
Arm / 1 6.3 x 71.9 x 4.3 in
Bucket / 1 - for 10'5" and 13'2" Arms 5.5 x 50.6 x 3.9 in
Bucket / 1 - for 8'4" Arm 5.9 x 50.6 x 4.3 in
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 65,191 lbs.
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
High 3.4 mph
Mid 2.8 mph
Low 2.0 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft.-lbs.
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant & Lubricant Capacity (Refilling)
Fuel tank 159.8 US gal
Coolant 9.7 US gal
Engine 9.2 US gal
Final drive, each side 2.4 US gal
Swing drive 3.6 US gal
Hydraulic tank 49.7 US gal
Diesel Exhaust Fluid (DEF) tank 10.3 US gal
Operating Weight (Approximate)
Operating weight includes 21 ft. 3 in one-piece HD boom, 10 ft. 5 in arm, SAE heaped 2.53 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28 in
Operating Weight 78,645 lbs.
Ground Pressure 8.35 psi
Shoes 31.5 in
Operating Weight: 79,483 lbs.
Ground Pressure 7.44 psi
Shoes 33.5 in
Operating Weight: 80,320 lbs.
Ground Pressure 7.03 psi
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Obtenir un financement
