|Make, Model:||Isuzu, NPS 75 155|
|Location:||789 Abernethy Road, Forrestfield WA 6058|
|Phone:||+61 8 9468 9125|
|Last Modified:||23/01/2020 9:54:17 PM AEDT|
New New New New New New New New New New New New New New New New New New New New
One of our New Proto-Type "Ready to Go" 4x4 Service Trucks, featuring the New A.M.T (Automated Manual Transmission) the only 2 Pedal Model in its class!
Fitted with a Heavy duty custom built service body to be 3580mm long x 2400mm wide steel tray, 3mm steel chequer plate floor,280mm drop sides enclosing the rear section of the tray behind the boxes, eight (8) recessed tie-down rings fitted to the tray floor.
Certified ROPS Incorporated Cab Rack
One (1) pressed 1.6mm zinc anneal locker to Passenger/Side of tray, 2400mm long x 500mm deep x 1000mm high with vertical dividers and shelving, flush fit gull-wing doors with gas stays, 3 point stainless steel drop T lock, pressed galvo drop down workbench and two side mounted spring bolts for locking into position in front of four (4) pressed galvo removable drawers.
One (1) pressed 1.6mm zinc anneal locker to Drivers/Side of the tray, 2400mm long x 500mm deep x 1000mm high with vertical dividers and shelving, flush fit gull-wing doors with gas stays, 3 point stainless steel drop T lock.
One (1) pressed centre locker, 1200mm Long x 500mm deep x 420mm high at front of tray between side lockers mounted on rubber mount suspension, level with top of the side boxes.
A 150mm engineers vice fitted and Protective Cover to Drivers/Side rear of the tray on an H/Duty zinc coated vice mount and 300mm x 300mm x 10mm plate steel.
75mm x 75mm x 6mm RHS built into tray base to suit a Kevrek tray mounted crane.
Kevrek 1000S crane with manual stabilizer leg. Crane handheld pendant with 5 metre lead
A fixed position battery cradle to house 2 x N50 (standard) and 2 N150 batteries
Variable oxy, accet and nitrogen bottle mounts fitted to the back of both boxes.
A PVC rip stop cover between the boxes utilising press studs ad Velcro fixings. Half size compared to single cab
Reece style tow hitch with a stair tread grill mounted level with top of ball and trailer plug.
A 3 points of contact access point at rear of tray utilising the tread step mentioned above.
60 Litre water tank and soap dispenser fitted to Drivers/Side rear of tray.
4.5Kg fire extinguisher mounted behind the driver to front of cab rack.
Gekco LED strip lights fitted to each side locker and quality door open alarms with buzzer in cab.
High mounted LED lights with OEM Switches in cab - mounted on ROPS Cab Rack
1.2mtr whip antenna/flag mounted on ROPS Cab Rack
One (1) beacon fitted to cab rack, four (4) work lights, two on ROPS cab rack and two on rear of each side box.
Battery Isolator with Locksafe lockout
Tray and lockers painted to suit cab, grey oxide paint on tray top.
WD 20/120 Westair diesel driven compressor.
Retractable air hose reel fitted and plumbed to the compressor with (2) air access points
Wheel chocks mounted to Mudguards,
All lights and wiring Minspec to ADR and police regulations.
VSB6 compliance, loaded to chassis with mudguards
Disclaimer: Check with the seller to confirm vehicle details and if any additional fees or charges apply. The information contained on this site is to be used as a guide only.