Cat CT630HD

Request a Quote

Request a no obligation, free quote on this product from your choice of dealers.

  • Models: CT630HD
    Engine: Cat C15 ACERT ADR 80/03 emissions compliant 6-cylinder
    Gearbox: Sheppard M100 power steering gear
    GVM: up to 26 tonne
    GCM: 120 tonne
    Overview: Introducing the all new CT630HD.
    HD for Heavy Duty. With a gross combination mass (GCM) rating up to 130 tonnes and strong demand from operators of road train triples, the CT630HD is a bold new addition to the CAT stable.
  • Model: Cat C15 ACERT ADR 80/03 emissions compliant 6-cylinder
    Type: In-line, tubocharged and aftercooled, electronic direct injection with dual DPF
    Displacement: 15.2 litres
    Other: Cruise control with steering wheel controls
    Rated at 550 hp @ 1800 rpm and 1850 lb.ft torque @1200 rpm. 2100 governed rpm.
    Jacobs engine brake, 3 stage switching
    High-capacity under-hood 2 stage air cleaner with restriction indicator and vacuator valve
    Fuel priming pump
    Excellent engine access
    100 Kph road-speed limited
  • Type: Eaton Fuller Solo Advantage two-plate ceramic with self adjust feature
    Diameter: 394mm
    Other: Light pedal, integrated air-assist clutch release system
  • Model: Eaton Fuller RTLO-20918B 18-speed overdrive
    Lube pump & oil-to-water transmission cooler
    Option: Eaton UltraShift Plus Transmission with Hill Start Assist
  • Model: Meritor MFS 14-143A wide track RHD
    Type: Forged steel I-beam
    Capacity: 6500kg
    Hub: Steel Hubs
    Option: Alloy Hubs
    Option: Meritor-MFS73 Capacity 7300kg
  • Model: Arvin Meritor RT50-160GP
    Capacity: 22,700kg (50,00lb)
    Drive Ratio (manual & auto): 3.91:1, 4.30:1 and 4.56:1
    Other: Inter-deferential power divider lock
    Differential cross-lock on forward rear and rear/rear axle with Lube Pump
    Hubs: Steel Hubs
    Option: Alloy Hubs
  • Type: 3 Leaf parabolic spring
    Size: 1480mm long
    Spring Capacity: 7300kg
  • Type: Primaax EX - Hendrickson PAX 460 suspension with road friendly compliance
    Suspension dump valve with control switch in instrument panel
    Inner frame suspension liner
    Heavy duty transverse torque rods
  • Type: Dual Circuit Air System, S-Cam brakes
    Size - Front & Rear: Front 419mm x 127mm with T24 chamber (MFS 14-143A)
    Rear 419mm x 178mm with type 30/30 chambers
    Park Brake: Both rear axles, spring-actuated
    Haldex auto slack adjusters
    Air dryer, Bendix AD-IS
    Air compressor, Bendix BA922 31.6cfm capacity
    Three manual drain valves with pull chains
    Dust shield on all axles
    Trailer brake hand control on steering column
    Semi-trailer air connections at back of cab
    Option: Hose tender slide bar, upper rear of cab
    Bendix 4-channel ABS with full vehicle wheel control system with automatic traction control
    419mmx152mm with T24 Chamber
  • Type: Sheppard M100 power steering gear
    Gear-driven power steering pump
    Adjustable tilt telescopic steering column with leather-wrapped 2-spoke steering wheel
    457mm diameter
    Option: Sheppard M100/HD94 dual steering gears
  • Type & Size: Wheels–Ten: bright finish alloy, 10-stud 285mm PCD, 8.25DC x 22.5
    Tyre Size: 295/80R22.5 on front axle; 11R22.5 on rear axles
  • Capacity: 984 litres total (Day Cab and Extended Cab)
    Size: Bright finished aluminium 660mm diameter cylindrical tank with alloy steps
    Dual Pick-up and return
    Fuel cooler, radiator mounted
  • Heat-treated steel, yield strength: 120 000 psi, 760MPa
    Frame rail dimensions: 263.5 x 94.1 x 11.1mm, section modulus 345cm3
    Heavy Duty Intermediate cross member
    Huck bolted to minimise maintenance
    Aluminium deck plate behind cab
    Tapered end of frame with fifth-wheel mounting angles
    Double front tow hooks
    Stainless steel bright finish bumper
    Front Underrun Protection Device
  • Type: LED headlights, with auto on windscreen wiper function and daytime running lights 12-Volt, negative to earth Diamond Logic multiplexing system
    Batteries: 4 x 12V, RHS chassis mounted
    Alternator: 12V, 160 amp, brush-type, pad-mounted
    Starter Motor: 105P with Soft Start
    Other Lamps: Two trailer sockets, 7-pin trailer lighting and an EEC socket for
    trailer ABS, at rear of cab
    Exterior light test system for pre-trip inspection
    Circuit breaker with manual reset
    Park brake warning horn if brake not applied and door opened
    Back-up alarm, 102 dba
    Cab rear work lights
    Option: P.T.O. prep kit (switch and wiring loom)
  • CAB:
    Day Cab 2085mm wide, galvanized steel
    Base coat, clear coat paint
    ECE-R29 compliant
    Tilting SMC hood and removable quarter fenders
    Bright polished stainless-steel grille surround
    Four-point cab mounting system with rear air suspension
    Outboard mounted unitized strut type cab suspension provides improved stability and comfort
    Drivers Seat: Gramag, hi-back, air suspended, leather trim fi tted with adjustable arm rests and integrated seat belt
    Passenger Seat: Gramag, hi-back, air suspended, leather trim fitted with adjustable arm rests and integrated seat belt
    Full instrument panel with on-board diagnostics display for diagnosis of fault codes in gauge cluster
    Overhead console fitted with netting restraints
    Premium trim with additional sound insulation
    Moulded access handles with 3 point entry and exit
    Quarter vent windows, Rear window
    Power windows fitted for both driver and passenger
    INSTRUMENTATION:
    Electronic speedometer and tachometer
    Gauges: engine oil pressure, voltmeter, engine oil temperature, air pressure, coolant temperature, fuel level, transmission temperature, rear axle temperatures, fuel trip data
    Warning system: low air pressure, low fuel, low oil pressure, high engine coolant temp and low battery voltage (visual and audible)
    STANDARD ACCESSORIES:
    Internal sun visors, front and separate side primary visors
    Twin windscreen wipers/washers, 2-speed with intermittent action
    Electrically adjustable heated mirrors with separate spotter mirrors on both sides
    Single air-horn, chassis mounted
    Outside temperature in dash display
    Luxury hi-rise, full stand-up sleeper cab for maximum driver comfort
    Bergstrom Blend Air, dual air conditioning unit off er separate
    temperature controls for both the driver and sleeper areas
    Insulated thermal and noise level reduction curtain, between sleeper and drive compartment.
    Deluxe large, inner spring mattress (2040 mm x 900 mm)
    Side vent windows with fl y screens
    Extensive storage capacity through both internal and external access, with external storage boxes
    Option: Aerodynamic package including: roof air deflector, with extension and cab side extenders
    EXTENDED SLEEPER:
    26" (660mm) Extended (Sleeper) cab with 3770mm BBC
    Sleeper includes: Single 660mm x 1840mm x 127mm lower bunk mattress) some light, under-bunk storage
    Refer to your authorised CAT Dealer for:
    Detailed information.
    Full Warranty details and limitations.
    Further details regarding the mass of options.
    The latest details on specifications, options, prices and availability.

Request Quote

You might be interested in...